We proudly present the new design of our 85SB, 90ZT, 95UR, and 100TR models, featuring significant improvements in terms of performance, comfort, and safety.

Design and Engineering Innovations

The cabin, now tiltable, simplifies access to components for faster maintenance. The hoods and counterweights have been redesigned to enhance aesthetics and aerodynamics. Additionally, the integration of LED headlights ensures greater visibility compared to previous models.

Technological Advancements

The new electronic joysticks offer greater precision and customization, allowing operators to adjust all movements directly from the display.

The hydraulic system and component upgrades have been enhanced to increase oil capacity and improve overall performance.

The Fan Drive, an automatic system for managing the cooling fan speed, is the best solution for optimizing and controlling the temperature of the hydraulic oil and coolant. Moreover, the system facilitates the machine’s initial warm-up: at low temperatures, the fan speed is minimized, allowing the machine to reach its operating temperature more quickly.

Comfort and Safety

The cabin suspension with oil-bath anti-vibration mounts eliminates vibrations and enhances comfort. Regarding safety, the new models comply with the latest EN 474 EU (01/02/2025) regulations, featuring a FOPS Level 2 upper guard, certified load-holding valves, and a standard rear-view camera. Safety during operations reaches the highest standards.

Proven Features, Guaranteed Performance

In addition to numerous innovations, the new 85SB, 90ZT, 95UR, and 100TR models retain proven features that ensure efficiency. The zero-tail swing profile provides maximum maneuverability in tight spaces. The ergonomic joysticks allow for intuitive and precise operation. As before, the models differ based on their boom type: •85SB: monoblock boom without swing, •90ZT: monoblock boom with swing, •95UR: Offset boom (cabin side), •100TR: triple articulated boom with swing for greater operational versatility.

Want to learn more about this innovation? Contact us!

We are pleased to announce a new and important collaboration between Sampierana and the Department of Electrical, Electronic and Information Engineering “Guglielmo Marconi” at the University of Bologna – Cesena Campus. This strategic partnership marks the beginning of an ambitious journey aimed at redefining the boundaries of innovation in the earthmoving machinery sector.

At the heart of this collaboration is an innovative research project aimed at optimizing the energy consumption of our battery-powered electric machines. Thanks to the complementary expertise of Sampierana and the talented individuals from the University of Bologna, advanced technological solutions will be developed capable of significantly improving the energy efficiency of our products.

This project is not only an investment in research and development but also a concrete commitment to our territory, the Emilia Romagna Region, and its young talents, as well as to a more sustainable future. Reducing the energy consumption of our machines means contributing to reducing the environmental impact of the construction sector and promoting the use of renewable energies.

At the University, we are accustomed to dedicating ourselves to research activities without ever having the opportunity to see our ideas realized. Collaborating with Sampierana offers us the chance to ground our projects and transform abstract concepts into concrete products and technologies.

Says Alberto Bellini, Professor in charge of the Cesena Campus Unit.

The collaboration with the University of Bologna allows us to connect with a research ecosystem of excellence at the European level. This will allow us to access new knowledge, collaborate with young talents, and develop cutting-edge technological solutions.

I am convinced that this project will allow us to stay up-to-date on the latest innovations even before they reach the market and consolidate our technological leadership.

Reiterates Giuseppe Fabbri, CEO of Sampierana

We are convinced that battery-powered electric machines represent the future of the construction sector. By investing in research and development, we want to consolidate our position as a technological leader and offer our customers increasingly efficient and sustainable solutions.

From 24th to 30th October 2022 the new edition of Bauma is coming, one of the most important international exhibition in the construction world.

Visit us at our stand:
Sampierana HALL A5.349 and Eurocomach HALL C6.313

Sampierana S.p.A. announces the reach of an important agreement with CNH Industrial, a global leader in the agricultural, earthmoving, commercial vehicles and powertrain sectors, with a wide range of products and a worldwide presence.
Sampierana exceeded 100 million in turnover in 2020, following the positive trend of recent years, with solid and concrete growth prospects.
This acquisition will enable CNH Industrials Construction Equipment business to integrate Eurocomach earthmoving machines, Sampierana undercarriages and spare parts into its current product portfolio alongside those of its existing third-party OEM partners.
We are proud of the agreement reached after long months of bargaining, as CNH Industrial chose our company for the reliability, quality and innovative technology of our products and also for our broad product portfolio and high customization capacity.

“Together with CNH Industrial, our company will continue to grow and will enjoy all the advantages that a large industrial shareholder can provide. The link with the territory has always been a cornerstone of our business and for this reason the investments in our plants in San Piero in Bagno, Modena and Cesena will continue: in fact, the agreement provides that production lines will be expanded as early as 2022 and CNH will strengthen all our sectors. At the same time, we would like to emphasize that our brands and commercial network will be preserved. Together with our families we will continue to support the new management, guaranteeing the path we have built together in over 30 years of work.“

Cesare e Moreno Para, Managing Directors of Sampierana S.p.A.

“This agreement is an important step in the growth strategy of our brands. About Sampierana we immediately appreciated the attention to the customer and the continuous commitment to please the market; for this reason, we have established a solid cooperation with the founders and their families. The challenge now is the growth of the business and we will do it together with the Para family, that will remain with us in this adventure.”

Stefano Pampalone, CNH Industrial Construction Equipment President

After more than a year of forced stop we are happy to meet again at the fair!

Our first appointment for 2021 is Agriumbria, a real point of reference in the panorama of fairs in the agricultural-livestock sector in Italy.

Visit us in the EXTERNAL AREA B – STAND 28.

The collaboration with Bosch Rexroth rises from a shared goals vision

In complex and competitive market times like the current one, it’s very important that the leading earthmoving machinery companies have a vision which points to innovation by becoming as efficient as possible on the entire production process, amortizing costs and avoiding machine downtime. In order to offer solutions full of value transformations to their customers, Sampierana has developed a synergistic collaboration with Bosch Rexroth, one of the main strategic suppliers specialized in electrohydraulic solutions.
Technical progress is bringing innovative solutions to the machinery sector with the electromobility which aims to meet the demands of machine manufacturers for compliance with regulations on eco-mobility, emissions and efficiency even in the most severe operating conditions. The electromobility sector is innovating with new generation digitized components, produced by the experience of Bosch Rexroth in mobile applications, the technological skills of industrial electrical solutions and many years of work in the automotive field. the EOC system – electronic open circuit – by Bosch Rexroth, Sampierana with its Eurocomach brand has been able to design, within two years, two innovative models for end users: the 60ZT and the 65TR, which are extremely agile, reduces costs and the probability of machine downtime, increases productivity and complies with the latest regulations in terms of environmental impact.

The 60ZT and 65TR midi-excavators: the difference is in the arm

The Kubota engine is powerful and above all – as now for the whole Eurocomach range – it is Stage 5, compliant with the latest European anti-pollution regulations. Both models are equipped with a Fan Drive system which makes the machine quieter and thanks to the reverse function (inversion of the direction of rotation of the fan for cleaning the radiant masses) cooling and cleaning operations are even more efficient.
The new cabin – wide and comfortable – is installed on specific hydraulic shock absorbers, which considerably reduce vibrations onboard. 
in addition to the servo assisted controls and a cushioned seat with arm rests and motion levers with closing pedals, the new 6-ton range models are equipped with radio, storage compartments and mobile phone holder with USB port, courtesy light, sliding sunblind and other practical accessories. In addition, the 7” multifunction display which allows the operator to overview the machine status and choose among different configurations by using simple and intuitive commands.
the illumination is already LED in standard setting for optimal visibility and reduced energy consumption.
Mono-boom in the 60ZT (zero-tail) and triple arm in the 65TR (short radius) are the two models that share performance and versatility, differentiated by the boom. the latter is highly appreciated in the most particular excavation, handling and loading operations.

The EOC system from Bosch Rexroth: flexibility and customization for all operators

Recently, the need to reduce emissions and comply with safety regulations has accelerated the digitization process of operating machines and, after the digitalization of hydrostatic transmissions for multiple applications, with the introduction of the EOC concept, Bosch Rexroth completes its offer of digitized systems also in the implementation part. The main goal is to achieve maximum performance by actively controlling the physics of the system in terms of flow, pressure and power. The EOC system allows maximum flexibility and customization of functions based on the type of work to be performed and the preferences of the operator. The adjustment is exclusively electronically done while the hardware is unchanged. This standardization allows an improved management of logistics and an optimized management in assembly to the reduction of variants.

Bosch Rexroth is going through exciting times in terms of innovation and – due to the digitization of Off-Highway applications – the company wants to create a more efficient, quieter and less polluted future of construction equipment. The mission we have is to work side by side with companies like Sampierana S.p.A to make all this possible.

Ugo Paternuosto, Sales Product and Application Manager Bosch Rexroth Italia

We are passionate about our work and because of this passion, ideas are transformed into unique solutions. We started with iron working and we came to create special machines, and the future of artificial intelligence will push us even further. Despite global expansion, we want to keep our roots anchored in our territory and create quality solutions that add value to our customers. It is thanks to the collaboration with a reliable partner like Bosch Rexroth that we can achieve these goals: integrating skills, sharing knowledge, improving together.

Alessandro Goisis, Marketing Dept. Manager – Giuseppe Fabbri, Eurocomach Technical Dept. Manager – Francesco Para, Eurocomach Technical Dept.

Spring 2021 will see the market launch of four new mini-excavators in the 4-5 ton range:  42ZT and 50ZT with monoboom, 45TR and 55TR with triple boom.

Defined by the same attractive design that characterises the most recent models 60ZT and 65TR, the new 4-5 ton machines show an important development in technology and a significant increase in performance and comfort.

The models 42ZT and 50ZT will be zero tail, while the 45TR and 55TR will be short radius, keeping a real compact design; these last two will expand our product family of triple boom machines (already consisting of models 65TR and 100TR) that becomes more and more popular and appreciated for its extreme versatility.

Engines are all Stage 5 equipped with Fan Drive, with a power from 32,3 kW for 42ZT and 45TR to 42,6 kW for 50ZT and 55TR. The hydraulic system is Load Sensing with electronic controlled pump according to the type of use (Economy, Standard and Power).

Great attention has been paid to the development of the driver’s seat, with a wide cabin and a complete and intuitive control panel, thanks to the new on-board computer imported from higher segment models.

The COVID-19 outbreak situation is getting us in a real international emergency that is actually affecting everyone – even if in different ways – and every aspect of our lives, including the markets.
Sampierana S.p.A. has immediately took all the necessary measures to ensure the safety of its collaborators and their families: since the beginning of March (before the Italian Government decrees of the 8th and 9th March 2020 entered into force), we gave masks to our workers and shared higher standards of hygiene and safety. We suspended job transfers, cleaning and sanitization activities have been intensified in all departments and the employees have been authorized working from home.
As the situation evolved – and in compliance with the measures adopted by the Italian government – we decided to temporarily close the whole company for 10 days, although some of our activities were authorized to be continued, we took this decision as a precaution and to better safeguard the health of our collaborators.

Now the three Sales departments of Sampierana (undercarriages, spare parts and Eurocomach machines) are working from home. At the same time, the undercarriage spare parts and Eurocomach spare parts warehouses, as well as the Eurocomach Service department, are active and available to our worldwide customers, working in total safety.

Sampierana’s business cannot be defined as stopped – but maybe “temporarily reduced” – because thanks to our sales network, we are still active in many countries around the world and we are offering our services at our best.

Recently there has been a continuous updating of the exhibitions calendar in Europe: from the Italian Samoter and Agriumbria to the Smopyc of Zaragoza, each exhibition has been postponed to autumn 2020. These are responsible and respectable choices, but we must not overlook our goal: starting again stronger than before once the emergency is over.

Now our main goal has to be to limit the spread of the infection and we are sure that the measures adopted by our company represent a fundamental point for ensuring the safety of our collaborators and all our interlocutors.

Designed to offer best comfort and maximum performance, the new 60ZT and 65TR are equipped with a Stage V engine, that meets all new EU regulations on emissions.

The new cabin – wide and comfortable – is installed on specific hydraulic shock absorbers, that allow to reduce considerably vibrations onboard. Great attention has been dedicated to comfort: in addition to the servo assisted controls and a cushioned seat with arm rests and motion levers with closing pedals, the new 6-ton range models are equipped with radio, storage compartments and mobile phone holder with USB port, courtesy light, sliding sunblind and other practical accessories. In addition, the 7” multifunction display allows the operator to overview the machine status and choose among the various use configurations using simple and intuitive commands.

Both models stand out for their compact dimensions, which allow the operator to work easily even in narrow spaces. The zero tail feature of the 60ZT allows to keep the whole machine within the radius of the undercarriage, favouring all complex operations, even when cabin door is open. The 65TR, on the other hand, has a short round and it’s the best ally for any type of construction site thanks to the articulation of its triple boom.