Demolition Hammer

 

The monoblock HBS without tie rods is available for excavators with operating weight from 0,5 to 14 t.

Available tools for different uses:
MOIL POINT: Suitable for concrete, mediumhard and not layered rocks.
CHISEL TOOL: Suitable for mediumhard and layered rocks.
BLUNT TOOL: Suitable for reinforced concrete and very compact rocks.
ASPHALT CUTTER: Suitable for cutting asphalt.
PYRAMID TOOL: Suitable for reinforced concreteand very compact rocks.
PILE DRIVER: Suitable for planting wooden or concrete poles.
WOOD CUTTER TOOL: Suitable for cutting all types of wood.

Martello Demolitore

Characteristics

Why to buy Hydraulic Breaker Sampierana: More power, less vibration and maintenance. The HBS breakers work with inertial nitrogen energy recovery, thus obtaining more power (more than 30%) and less vibration thanks to the nitrogen chamber that reduces maintenance costs, since it has no diaphragm. Long lasting nitrogen charge. In the past, energy recovery breakers required frequent nitrogen refills; with the new sealing system and the new compound developed by Freudenberg they are able to guarantee a gas tightness equal to 300% more than in the past. Protected tubes. The tubes are completely protected through the casing and they’re suitable for every type of excavation, especially in narrow spaces. The particular design, with a closed box casing as well as the addition of sound-absorbing material, allowed the breaker to have very low noise levels. Double retainer pin. The tool-locking system with a double retainer pin allows adequate and uniform wear of the same and ensures longer maintenance intervals for the whole locking system. Monobloc body without tie rods. The entire HBS series benefits from the particular monoblock construction; this feature gives the structure a very high resistance to leverage, during work. The breaker is built in one only piece and it is without tie rods, thus obtaining greater production and less maintenance as a result. Only two moving parts. For all types of installations (pressurization).The HBS series tolerates high back pressure, and it has a wide calibration range of the required oil flow, in order to make the installation easier. The piston moves in a single interchangeable cylinder liner that keeps the main body intact and that is easy to replace in case of necessity. The piston is built with a special geometry as to keep a constant energy of impact, and to reduce damage in any critical condition. Visibility and versatility. The models of the HBS series, with their tapered shape, provide the operator with an excellent view during the work and allow to operate close to the walls, both in narrow and wide spaces. Hydraulic system for blank firings. The hydraulic system creates a regenerative oil circuit that preserves the breaker from blank firings when the tool is not in contact with the rock.

Martello Demolitore
Contact us
Would you like to learn more or request a quote? Our consultants are at your disposal.
Si
I read the information about my personal data’s use reported in your Privacy Policy

Si
I wish to subscribe to the Newsletter and consent to the processing of personal data for this purpose, under the conditions indicated in the Privacy Policy

Which brand are you interested in?


MARKETING ACTIVITIES

The processing of my Data by Sampierana S.p.A in paper form or through automated or electronic means including mail, email and telephone (e.g. automated phone calls, SMS, MMS, Fax) and any other means (e.g. websites, mobile phone apps), for the purpose of sending commercial communications and advertising relating to products and services, as specified in the privacy policy

Nox+Rototilt

The Nox+Rototilt hydraulic actuators in the Sampierana catalogue have technical features designed for every need.

READ MORE

Attuatori

JR Tilt+Twist KS

JR Tilt+Twist hydraulic actuators are available within the Sampierana range. The technical features are specific and tailor-made according to the machining required.

READ MORE

Render-Pinza-legna-chiusa

Wood grapples

The wood grapples are ideal for handling logs, long wood, twigs and for loading chippers. The range includes 5 different models for excavators with operating weights from 1,5 to 9 TON

READ MORE

Benna

Ditch cleaning buckets

Our ditch cleaning bucket (DBS) is ideal for constructing and maintaining slopes, banks and ditches. It is made of high strength ST52 steel. Our ditch cleaning buckets are available with adapters for all European Markets.

READ MORE

Trivella

Auger

Sampierana augers (HAS) are built with high endurance steel and equipped with a high-performance hydraulic motor, they guarantee a long term reliability.

READ MORE

Ripper

Ripper

Single Ripper Sampierana (SRS) is ideally suited for working on soils and for uprooting roots.

READ MORE

Render pinze selezione Sampierana

Sorting Pliers

Our sorting grapples (SGS) are designed to handle different materials. Thanks to its particularly robust structure they’re able to do also light demolition works.

READ MORE

Frantumatori_Demolitori_Sampierana_attachments

Demolition Pulverizers

Demolition Pulverizers Sampierana (DPS) were developed for primary and secondary demolition. The range includes models for excavators with operating weight from 2,5 to 15 t.

READ MORE

AR e CR

AR/CR System

Among the four types of quick coupling locking mechanisms there are also the two quick coupling systems AR and CR System. AR and CR System are listed among the semi-automatic mechanical quick couplers. Advantages: The operator, thanks to the closing and opening mechanism, must leave the machine only once for uncoupling the bucket, while for coupling they can stay in the cab.

READ MORE

Bucket Grate

The high strength ST52 steel and the reinforced structure make our skeleton bucket (STS) robust and long lasting. It is used for separating stones and aggregates.

READ MORE

Benna orientabile

Bucket Cleaning Swivelling Ditches

The 45° left and right tilt makes our ditch cleaning buckets (DTS) useful for maintenance and construction jobs on sloping ground.

READ MORE

Rototilt

Revolving bucket for Rototilt

Ditch cleaning buckets shaped to work in combination with a Tilt Rotator (DRS)

READ MORE

Benna Sampierana

Standard Bucket

The Sampierana Standard Bucket is made of high-strength ST 52 steel. Sampierana Standard Buckets are available with adapters for all European markets.

READ MORE

CP/Pin Lock

CP / Pin Lock System

S-CPLS is a pin-on mechanical quick coupler, also available hydraulic. The CP/Pin Lock system allows a direct quick coupling with attachments with pins. Traditional in UK, Ireland but also in the Iberian Peninsula.

READ MORE

S System

The S-SN enables an easy coupling and uncoupling of the attachments in just a few seconds. This type of quick coupler is traditional in Denmark and Scandinavia.

READ MORE

CW Sampierana

CW System

The CW quick coupler is the most common in Belgium, Luxembourg and the Netherlands. Available in semiautomatic or hydraulic versions.

READ MORE

Klac System

Klac System

The S-KL System is a traditional non-reversible French quick coupler, available in our catalogue in both a semi-authomatic and hydraulic version.

READ MORE

CM/M System

CM/M System

The S-CM quick coupler is mostly common in Austria and Switzerland, but also in the Iberian Peninsula. This type of quick couplers work with a spring coupling mechanism. The opening happens with a key.

READ MORE

CS Schnappmatic

The S-CS quick coupler is the most famous in the German market, but also in Eastern Europe. Allows coupling an d uncoupling in just a few seconds. Available semi-authomatic or hydraulic.

READ MORE

Attacco rapido

AR/CR System

This type of quick coupling has a spring-loaded locking mechanism. It is opened using a key. The AR system is one of the most traditional in Italy, but is also used in France (available in semi-automatic version, hydraulic version and all with Tilt system).

READ MORE

Do you need help?

If you need more information or if you want to request a quote, our consultants are at your disposal.

Contact us